|Material:||304, 304L, 316, 316L, 316Ti, 317L, 321, 321H, 347, 347H, 310S, 310H, 904L, 254SMO||Types:||Buttweld Tee|
|Welded:||18” To 110” (DN450~DN2800)||Seamless:||1/2” To 36” (DN15 ~DN900)|
|Connection End:||Butt-weld||Standards:||ASME/ANSI B16.9, MSS-SP-43, MSS-SP-75, EN/DIN, JIS B2311/2312/2313, ISO 3419, ISO 5251 Etc.|
stainless steel tube weld fittings,
stainless steel buttweld fittings
6 Inch Schedule 40 304 , 304L , 316 , 316L Weld Fittings Tees ASME/ANSI B16.9
Buttweld fitting is defined as a part used in a piping system, for changing direction, branching or for change of pipe diameter, and which is mechanically joined to the system. Buttweld fittings is a butt-welded connected pipe fittings, it is easy for installation and maintenance. There are many different types of fittings and they are the same in all sizes and schedules as the pipe.
Buttweld fittings (BW fittings) whose dimensions, dimensional tolerances et cetera are defined in the ASME B16.9 standards. Light-weight corrosion resistant fittings are made to MSS SP43.
1. Stainless steel elbow and stainless steel tee is the most important butt weld pipe fittings, they are fabricated by seamless stainless steel pipes or steel plate and get beveled end for butt-welding.
2. A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.
3. This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.
|Elements||WP304L(wt%) / CR304L / S30403||304(wt%) / CR304 / S30400||316L (wt%) / CR316L /S31603||316 (wt%) / CR316 / S31600|
|(C) Carbon, max||0.03||0.08||0.03||0.08|
|(Mn) Manganese, max||2||2||2||2|
|(P) Phosphorus, max||0.045||0.045||0.045||0.045|
|(S) Sulfur, max||0.03||0.03||0.03||0.03|
|(Si) Silicon, max||1||1||1||1|
|(Ni) Nickel||8.0 - 12.0||8.0 - 11.0||10.0 - 14.0||10.0 - 14.0|
|(Cr) Chromium||18.0 - 20.0||18.0 - 20.0||16.0 - 18.0||16.0 - 18.0|
|(Mo) Molybdenum||N/A||N/A||2.0 - 3.0||2.0 - 3.0|
|Stainless Steel||A403 304/L,304H ·310S ·316/L,316Ti·317/L·321/H ·347/H ·S31803·S32750 ·904L|
|Low Temperature Steel||A420 WPL3, WPL6|
|Alloy Steel||A234 WP5, WP9, WP11, WP12, WP22, WP91|
|High Yield||WPHY42, 52, 60, 65, 70|
|Duplex & Super Duplex||A815 UNS 31803, UNS 31254, UNS S32750|
|Nickel Alloys||alloy200, 400, K500, 600, 625, 800, 825 ,alloy 20, hastalloy B2, C22, C276|
Quality & Inspection:
Heavy wall thickness elbow is our strength. All of these materials are available for third party inspection, such as SGS,BV,Lloyd’s,TUV etc. For more information, please contact us.
Contact Person: chan